Understanding how to properly clean a huge mattress, whether you’re dealing with a major stain or your mattress is simply starting to smell a little bad, is not always easy. You may clean your carpets with steam, but make sure you are well familiar with the procedure before attempting it on your own.To assist you in keeping your bed in excellent condition, we’ve compiled a wealth of information on steam cleaning, spot treating, and other washing procedures.
Cleaning a Mattress with Steam
Even if you do an excellent job of protecting your mattress from stains and spills, steam cleaning will still be necessary from time to time. Sweat, skin cells, and dirt will all accumulate on your mattress.However, sweat, skin cells, grime, and dust are inevitable, therefore we recommend deep cleaning your mattress at least once a year, if not more frequently.So, what is the proper method for steam cleaning a bed? It’s a rather straightforward process.
First and foremost, you’ll want to be certain that you have all of the items you’ll need on hand; having the following is something we’d recommend:
- An attachment for your vacuum which is available.
- Use a neutral cleaner, such as laundry detergent or baking soda, to clean your surfaces.
- Vinegar
- towelettes à sécher
- Cleaner that uses steam as its primary ingredient.
Cleaning Methods Explained in Detail
- Vacuum and deodorize
Hair, skin cells, dirt, and other items that do not disintegrate when steamed will be more easily removed with the use of a vacuum attachment.Baking soda can be sprinkled over the entire surface of your bed before vacuuming it if you have any leftover odors or want to ensure that it smells fresh.
During this stage, you may even add a few drops of your favorite essential oil to the baking soda to make your bed smell even more fresh and deodorized as you sleep. Before vacuuming up the baking soda mixture from your mattress, allow it to sit for at least an hour to absorb any odors or oils on the mattress.As you cover the entire bed with short strokes, pay close attention to the places that are most likely to become dirty, such as the areas behind your head and feet.
- Spot Treat
If you have any stains on the surface of your mattress, you should remove them before you begin to steam clean the surface. Stains can be removed well with a solution of light detergent and water applied with a sponge. However, you choose to clean the stain, make sure not to over-saturate it with liquid. Fill the water tank with your steam cleaner’s solution and double-check that all of the parts are securely fastened before you begin steaming your house.
Check the mattress for moisture: it should feel somewhat moist but not dripping wet; think of it as a gently drizzle rather than a thunderstorm.Try steaming down the sides of the mattress as well, for an even more thorough cleaning experience.There is no need to bother about steaming the underside of the bed because most mattresses are not double sided.
- Allow it to dry
Allow for a minimum of three hours of drying time once the entire bed has been steamed.For a faster drying time, open the windows and place a fan or two near the bed to direct air directly at it. If you have a clear space outdoors and the weather is nice, you can even bring your mattress outside to dry in full sunshine.
Using Steam to Improve Performance
- The best steam machine is one that meets your requirements and is within your price range
Working with water that has reached 212 degrees Fahrenheit is possible with any machine. It is not common for household carpet cleaners to heat the water sufficiently hot in order to eliminate bacteria, dust mites, and bed bugs. In order to ensure that the steamer will get hot enough, check the specifications of the steamer.
- Follow the manufacturer’s directions for filling and heating the steamer
Water is stored in a tank, and a motor provides heat, with a wand used to apply steam to the area being cleaned. Refill container to a desirable level.
- Using long and gentle strokes, apply the steam to the mattress top
Make sure the steamer is just over the mattress and not touching it. The steam should be applied in two-foot (61-centimeter) strokes beginning at the top left corner of your mattress. Otherwise, the mattress will take a long time to dry if it is only slightly damp but not soaking wet from the steam.
- Use a steamer to wipe the corners of the mattresses to verify that it is cleaned regularly
Using this method, the maximum number of germs, mites, or bed bugs is destroyed.Many mattresses manufactured nowadays are one-sided and never flipped, removing the need to steam the underside of the mattress once it has been purchased. If your mattress is double-sided or if the bottom is dirty, wait until the top is totally dry before flipping it over and repeating the entire process on the opposite side.
- Let the mattress air dry for 2-4 hours before using it
If feasible, place the mattress in an area of the room that receives direct sunshine. To help remove any excess moisture from the mattress after steaming, you can use a wet/dry vac or a carpet steamer to help extract it.Moving the mattress directly into the sun for drying is another option if you have a clean location outside to do it.
- As soon as it’s completely dry, cover the bed with fresh linens
Try to dry it in sunlight as early as possible and cover it.
