Cleaning the aquarium of your betta fish will need a few items, which are listed below.
1.Gravel Vacuum
Keeping the gravel clean is by far one of the most crucial components of this entire activity, so make a point of doing so on a consistent basis.
2. Scrubber for algae
Algae are a constant menace in every fish tank, whether it is a betta fish tank or not. Aquatic algae frequently accumulate on aquarium glass and, if left unchecked, can swiftly grow and spread throughout the tank.
3. A Bowl and a Bucket
The betta fish will have to be removed from the aquarium while you are cleaning it, hence why you would need a tiny bowl to keep it safe while you are cleaning.
4. Drinking Water
It is important to change the water in the aquarium on a routine basis, anything between 30% to 50% of the total volume of the tank.
5. A razor blade
Any stuck-on debris, whether in the tank or on the decorations, may be scraped off with a razor blade, which can be quite useful.
6. Fishnet
Cleaning the aquarium needs you to remove the betta fish, which is accomplished with the help of a fish net.
7. Brushing
For this task, you will want a toothbrush or another tiny and medium-stiff bristles brush. Use this to wipe the aquarium decorations off of the aquarium.
1. Clean up after yourself
Washing your hands with warm water and a mild soap is the first item you should do before starting any project.
2. Turn off all of the lights and outlets
Everything electrical in or around the aquarium needs to be disconnected before you can begin working on it. Remove all air pumps, filters, lights, heaters, UV sterilizers, and anything else that may be connected to the system from the power source.Active electrical units, such as lights, should not be allowed to fall into the tank water unless they are particularly designed to do so. If this happens, it might result in electrocution of both you and the fish in the aquarium, or at the at least a major injury.
3. Water Must Be Scooped Out
Keep in mind that you should replace the water in your aquarium once a week, replacing anything from 30 percent to 50 percent of the total volume.
4. Remove the Fish from the Water
Set up a screen over the bucket, if necessary, to prevent the betta fish from jumping out. Given that they are well-known for jumping, you must use caution.
5. Take down All of the Decor
You will also want to remove any and all ornaments from the tank in order to perform a complete betta tank cleaning. These will be washed in the next several phases as well. Keep in mind that the aquarium decorations can become dirty as well, and they will need to be cleansed and sanitized on a regular basis as well.
6. Use that Gravel Vacuum
Whether your gravel vacuum operates will vary depending on the model, but switch it on or hand activate the machine despite of how your functions. Using a vacuum, remove any and all trash that you see floating around or embedded in the gravel.
For others, it is sufficient to simply drain the entire contents of the aquarium, straining the gravel into a sieve and draining any remaining water down the sink, followed by a thorough rinse with warm tap water to remove any remaining gravel.
7. Remove the Algae from the Water Tank
Remove any and all algae from the aquarium as soon as possible as the next step. Keep in mind that you will need to use the razor blade and an algae scrubber, ideally a magnetic one, in order to clean the whole surface of the glass or plastic aquarium wall.
8. Cleaning the Decorations
In addition to cleaning the aquarium, you should clean the ornaments. Cleaning large rocks and wood is vital for removing algae and dirt from of the surfaces of these materials. Simply rinse all decorations under running water and scrub any remaining debris away with a toothbrush to complete the task quickly and efficiently.
9. Replenishment of the Aquarium with Water
When it comes to placing water back into the tank, it is among the most important processes that must be followed and done correctly. Firstly, collect as much tap water and you’ll need to fill the aquarium into a bucket and set this aside for later.Depending on the hardness and pH levels of the water, you may need to treat it in order to remove chlorine from the mixture.
Reintroduce the conditioned water back into the betta tank in a moderate manner, being careful not to disturb the tank. Because you still have old aquarium water to reintroduce into the tank, which is the water that the betta fish is presently sitting in, the betta tank should be approximately half-full at this point.Using your hands, gently whisk the water to mix the old and fresh.
10. Place the decorations back
As soon as the betta tank has been thoroughly cleaned, you can reintroduce the previously cleaned aquarium decorations back into the tank. After you have finished arranging the decorations in the tank according to your preferences, you may plug in the filter, lights, and any other electrical equipment that you may have.
11. Reintroduce the Betta into its original tank
In the final phase, the betta fish should be returned to its original tank of water and cleaned. You can simply place the betta in the tank in the cup that it was previously in. Tip the cup slightly to the right and wait for the betta to emerge on its own. To avoid injuring the fish, simply move slowly and gently around it. As a result, your betta should be happy and swimming around in a sparkling-clean aquarium.
