Skip to content
Home » How to Clean an Area Rug on Hardwood Floor

How to Clean an Area Rug on Hardwood Floor

How to Clean an Area Rug on Hardwood Floor

Adding area rugs to a room can help define spaces while also providing warmth beneath the feet. Regardless of whether they are made of wool, natural grasses, or synthetic fibers, they will eventually require cleaning.

It is necessary to have the following supplies:

Tooling / Equipment

  • A brush with a soft bristle.
  • Vacuum
  • Bowl that is not too big.
  • cloths made of microfiber
  • The use of tarps or sheeting made of plastic is recommended.
  • A sponge mop is usedto clean surfaces.
  • Bath towels that have been used previously.
  • Cleaner using steam


  • Sodium bicarbonate
  • soapy water for dishwashing
  • Bleach containing oxygen
  • stain removal for carpet
  • Shampoo for carpeting

Instructions; How to Clean a Rug in the Living Room

Dispose of Dirt with a Vacuum

Clean the rug thoroughly before performing a thorough cleaning or performing routine maintenance. A vacuum equipped with a carpet beater bar will loosen and suck away dirt while cleaning the rug thoroughly. Assuming that the rug is small enough, vacuum only the top of it before turning it over and vacuuming the bottom.

If at all possible, take the pad outside and shake it vigorously, then vacuum or dust mop the floor beneath the area rug to remove any remaining dust.

Stains Could Be Cleaned Using Spot Remover

  • Using a solution of one teaspoon dishwashing liquid mixed with two cups of warm water, you can remove many different types of stains, especially dirt and food stains, by spot cleaning.
  • Wash the area with a clean cloth soaked in fresh water and blot it to remove any remaining soapy residue.
  • As a last resort, mix together a solution of warm water and oxygen-based bleach according to the directions on the product label. Spread the mixture in an indirect manner and keep this on for one or two sessions to brighten the skin.

Rugs with odors should be cleaned

Baking soda can be used to brighten and remove odors from an area rug by liberally sprinkling it over the entire surface. The baking soda should be gently worked into the fibers of the pile until it reaches the backing, especially if it is long or plush.

Allow the baking soda to sit on the carpet for several hours, preferably overnight, before vacuuming it up. It will absorb odors, and its mildly abrasive nature will help to loosen any soil that needs to be vacuumed up.

The area rug should be vacuumed

  • Move the area rug to one side by rolling it up.
  • Remove any dirt, dust, and grit from the floor by vacuuming or dry mopping it.
  • On top of the plastic sheeting, spread the area rug out to its original size.

Using a Carpet Steamer to Clean Your Carpets

Cleaning an area rug with a carpet steamer, whether at home or rented, can be accomplished after the room has been prepared. Observe the manufacturer’s instructions and clean the steamer with a cleaning solution that has been approved for use.

Increasing airflow and drying time can be accomplished by opening windows, turning on ceiling fans, or placing a circulating fan in the area. Flipping the rug over and allowing the backing to dry is a good idea once the surface appears to be dry.The drying time for an area rug can range from 24 to 48 hours, depending on its size and condition. The rug must be allowed to dry completely before it can be placed back on the floor. This requires patience and care.

The Rug Should Be Returned to Its Original Location

  • The steps should be reversed once the rug has been allowed to dry completely.
  • Moving to one side and rolling up the cleaned rug is a good option.
  • Take the plastic sheeting off the floor and set it aside for the time being.
  • The Carpet Pile Should Be Raised
  • Vacuum the area rug thoroughly after it has been reinstalled in order to lift and smooth its pile.

Cleaning an Area Rug: Steps to Follow

  • Cleaning the house

Furniture or other objects should be removed from the rug before cleaning it. Vacuum both sides of the rug thoroughly to remove any loose dirt. Maintaining your rug’s life expectancy requires regular vacuuming, particularly if it is in an area with a lot of footfalls.

Remember to clean the entire surface with the brush attachment as well as the front side, as the back side tends to accumulate dust and dirt more quickly. For a deodorizing treatment, sprinkle baking soda all over the rug and allow it to sit for several hours, allowing the baking soda to gently work its way into the rug’s fibers even for small rugs.leaning the baking soda will eliminate any unpleasant odors.

  •  Removing the staining

It is possible to stain your rug due to spills or accumulated dirt. In order to get rid of stains, you’ll need to use water or a liquid cleaner that won’t damage the hardwood floor underneath while also getting rid of the odors.It is therefore recommended that you protect the floor by either placing another rug pad below the stain or by placing a waterproof barrier such as a plastic sheet under the entire rug and letting it dry overnight.

It is possible to clean stains from rugs using any of the methods listed below:

  • Sodium bicarbonate
  • cleaners for rugs
  • Vacuuming with steam
  • Hose with high pressure
  • soapy water for dishwashing
  • a powder for dry cleaning
  • Dishwashing liquid with a soft texture

To determine the effect of any cleaner or product on your rug’s colour, test it on a small area on the edge first. Then allow it to air dry because you’ll need air circulation to completely dry it. Consider the following scenario: a delicate oriental rug that requires the services of a professional or a gentle cycle to be thoroughly cleaned.