Skip to content
Home » How to Clean Brushed Nickel

How to Clean Brushed Nickel

How to Clean Brushed Nickel

Brushed nickel fixtures will give your bathroom a contemporary feel. However, the most significant disadvantage of these fixtures is that they are prone to staining and must be cleaned with extreme caution or risk being ruined.

You’ll require the following:

  • 2 rags for wiping
  • Cleaner that is non-abrasive
  • Vinegar
  • Soda of baking
  • bottle of spray
  • Dish soap that is gentle but effective
  • toothbrush
  • a sheet for drying
  • Get your cleaning materials together

It’s critical to know what cleaning solution to use on your brushed nickel fixtures before you begin.Using mild dish soap is the quickest and easiest way to clean your brushed nickel bathroom fixtures. Add vinegar and/or baking soda to the solution to remove persistent water stains, limescale, or calcium buildup. Fill a spray bottle halfway with distilled vinegar and the other half with tap water for the vinegar solution. Place your goods in the bathroom area on the floor for easy access once you’ve gathered them.

  •  Use a cleaning solution that is right for you

Always use warm water instead of cold water when washing your brushed nickel fittings. Warm water penetrates mineral deposits more quickly and aids in their breakup. This is an excellent location to see if vinegar or baking soda will be required. If the spots persist, pour the vinegar solution over the fixtures and let for 2 to 5 minutes.

  • Scrub the Fixtures, Nooks, and Crannies with a soft brush

Make sure to wipe around the edges of the fixtures, since this is where water collects. Also, don’t be afraid to clean dirt and grime out of the nooks and crevices between the fixtures with your toothbrush. Because it can be difficult to get between the slots in bathtub and sink drains, use a toothbrush.

Scrub your brushed nickel bathroom fixtures with a dryer sheet if you notice layers of soap scum that aren’t disappearing. A dryer sheet can assist in the removal of soap scum from fixtures. To assist rub off the soap scum stains, grab the dryer sheet in both hands and slide it from side to side.

  • Remove the cleaning solution by rinsing it away

After you’ve cleaned all of the bathroom fixtures completely, wipe them down with a moist rag to eliminate any remaining cleaning solution. Removing your detachable shower arm and spraying the tub faucet can also be beneficial. Ensure that all of the soap and/or vinegar has been removed from the fixtures, as you don’t want any soap residue or tarnish from the vinegar.

  • Make certain the fixtures are completely dry

Because brushed nickel is a matte finish, it doesn’t need to be waxed after cleaning. While there is no need to polish the surface, you should try to buff it dry to remove any remaining oil or residual stains. You’ll note that the finish appears to be fresh new once you’ve done so.

Brushed Nickel Bathroom Fixtures: How to Take Care of Them

Brushed nickel fittings have a matte finish that gives them the look of ancient fixtures while maintaining the functionality of modern fixtures. Although brushed nickel fixtures may be cleaned in the same way as other metal fixtures, they do need to be polished on a regular basis to keep the etched surface bright and protect it.

  1. Using a gentle, wet rag or chamois cloth, wipe the fixtures clean once a day.
  2. To clean hard-to-reach spots like where the faucet and sink meet, use a cotton swab soaked in glass cleaner or hard-surface cleaner.
  3. A soft rag or chamois cloth should be used to dry the fittings. To polish the nickel, rub it back and forth quickly.
  4. Every four weeks, give dry fixtures a coat of paste wax, such as automobile wax.

You’ll Need These Things

  • chamois cloths or 2 rags
  • dab of cotton
  • Cleaning solution for glass or hard surfaces
  • Wax Paste


To remove hard-water stains, spray the fixtures with a half-and-half solution of white vinegar and water. After that, rinse well.

Brushed Nickel Fixture Care Instructions:

  • Use Simple Green Pro HD to get the job done
  • Scrub
  • Scrub with a damp, gentle toothbrush, focusing on crevices
  • Rinse
  • Dry
  • Using a microfiber cloth, buff the surface until it is completely dry
  • Polish
  • Simple Green Pro HD cleans brushed nickel without polishing it, so use a polishing agent to bring it back to life

Vinegar that has been diluted

  • Water can be used to dilute white vinegar

Make enough solution to completely immerse the object if it is detachable, such as a shower head. To save time, use a microwave-friendly container.

  • Examine a hidden location

Make certain that the mixture is thoroughly mixed. Apply the cotton swab to a spot on your nickel product that is difficult to see. Allow 30 minutes to pass. If your brushed nickel finish appears to be in good condition, you can use the vinegar solution to clean the entire item.

  • The vinegar solution should be warmed up

Using a microwave-safe container, warm the solution in the microwave. You can also heat the solution over the stovetop in a big pot. Warm the solution, not boiling it.

  • Your object might be sprayed or soaked

Drop the nickel chip immediately into to the liquid if it is little sufficient, and just let it settle for half an hour. Pour the mixture into a squeeze bottle and soak the polished nickel with if the nickel chip cannot be retrieved or too large. Take 30 minutes again for solution to sit on the metallic surface.

  • Clean the item by rinsing it thoroughly

Vinegar should not be left on the product’s surface for long periods of time. To completely rinse the brushed nickel, use a pail of water or a towel dampened with water. To avoid water stains, buff dry with a soft cloth.