Everything you’ll need to get started cleaning a kegerator beer line may be found below.
Cleansing compounds are available in powder form to assist you in the cleaning process and to remove any residues.
• A bottle for combining the cleaning solution with other ingredients;
• A beer line cleaning kit, either automatic or manual.
• A spanner wrench, which will be used to remove the faucet.
- Remove the regulator and CO2 tank from service
You must first accomplish this step before you can begin cleaning your beer lines. As a result, if you properly follow these instructions, then would be able to evade any unnecessary issues throughout the brew line cleaning procedure.
- Removing the Beer Faucet
Afterwards, you must remove the beer faucet with the use of a spanner wrench. The majority of beer faucets are configured so that they tighten when rotated in the counter-clockwise direction and loosen when rotated in the clockwise direction. Simply remove it with your hands once it has become loose enough to be removed.
- Move on to the Keg Coupler
Because of the growing popularity of beers on tap, many bars and restaurants choose to provide their customers with a greater variety of options. Pubs require larger beer tap systems in order to provide a diverse range of options, which is why having up to 12 taps appears to be more reasonable than having a basic kegerator system in most situations.
- Creating the Cleaning Solution
You must now prepare the solution that will be used to clean the kegerator beer line. A separate bottle will be required for this purpose, in which you will combine the powdered cleaning agent and water. The amount of water and powdered cleaning compound that you use must be in the proper proportions, and you must double-check this. It is necessary to utilize hot water in order to create a powerful cleaning solution.
- Fill the Kegerator Beer Line with the cleaning solution
Utilizing the beer lines cleansing kit, you might then pump the cleaning fluid into the kegerator’s beer line, finishing the cleansing.The ability to maintain order during the cleaning procedure will result from this. The hose from the beer line cleaning kit can be connected to the opening created by removing the faucet head from the line. The result is that the beer line will have been thoroughly cleaned, right up to its keg-coupling connection point! Whenever you’re ready, you should tilt it and then let it fly.
- Rinse and dry your clothes
All of the remnants from the solution will be removed by the hot water, and the beer line will be fully clean. The process should be repeated a total of two more times; however, the more the merrier in our opinion.
Getting the Lines Clean
A cleaning solution is circulated through each beer line for several minutes in professional bars, but this is impractical for the majority of home brewers. A simple soak and rinse should be sufficient for the average home enthusiast. It’s a rather basic procedure in general.
- Using high-pressure water, flush the draught line with a cleaning solution until the water flows clear.
- Allow just several moments for the liquid to absorb into the lines before proceeding. Every 15 minutes or so, I go.
- Next, tap the keg that’s on the line.
- Allow the faucet to run until the beer begins to flow.
In fact, you don’t even need any specific equipment in order to begin working. Cleaning solutions should be made and stored in an empty keg, pressurized with carbon dioxide, and pushed down the line like beer. Next, fill a keg with ordinary water and repeat the process. No need to use entire kegs for this project.
Keep the outside in good condition
- Every keg you consume should be cleaned out of your kegerator
Using your kegerator and cleaning it after each usage is recommended. As a result, beer residue in the line and faucet is removed more effectively and completely. You may avoid contaminating other beers by thoroughly cleaning after each usage.
- Turn off the kegerator if it is still running
Completely turn off the kegerator before beginning to clean it. The kegerator needs to be unplugged. Check to see that the CO2 is turned off. Afterwards, you’ll want to shut down the regulator, disconnect the tap, and totally remove the keg from the vehicle.
- Cleaning the panels with a mild hot water and soap to eliminate any residues is a good idea
Beginning with the outside of the kegerator, clean it inside and out. To clean all surfaces, use a mild soap with no aroma and plenty of warm water.
Any spilt beer, puddles, or drops might find their way into your kegerator and cause difficulties with future kegs of the same beer.
The Removable Parts Need to Be Cleaned
- You should invest in a cleaning kit for your beer lines.
A bottle, pump, and hose are included for connecting to your existing beer lines. There is also an alcohol-based cleaner included to keep your beer lines clean.
It is possible to purchase kits that are manually pumped, kits that connect to your CO2 pump, and kits that contain a pressured pump.Making cleaning pumps out of quart bottles or soda kegs and tubing is something that some people like doing.
- Disassembly and removal of the keg coupler from the faucet
Remove the faucet and keg coupler from your kegerator before you begin sterilizing it. The faucet should be dismantled. There are approximately five separate parts to a faucet, depending on the model.
- Pre-soak the faucet pieces, including the keg coupler, in the cleaning solution for 15 minutes
Fill a bowl halfway with warm water and submerge the faucet components and keg coupler in it. Make sure to soak the pieces.