If you want to keep your Ninja blender working for years, learning how to clean it properly is essential. It would be a shame to waste all of your money on an energy-saving, cutting-edge gadget merely because you let food to accumulate.You can handle anything, from difficult stains to food build-up and unpleasant odors, as long as you have the necessary cleaning.
- The method of the dishwasher
Putting your Ninja blender in the dishwasher is the quickest and easiest way to clean it. You won’t have any issues with the jar, lid, or blades because they’re all dishwasher safe.If you’re short on time or simply don’t want to wash your dishes by hand, this is a fantastic option. Because you’re not using any running water, cleaning Ninja blenders in this manner is environmentally beneficial.
- Self-cleaning
Many folks are surprised to learn that their Ninja blender can literally clean itself.To begin, half-fill your Ninja blender jar with hot water. Then, for approximately a minute or two, turn the blender on high or medium speed. Finish by rinsing the Ninja blender with clean water and allowing it to air dry to complete the cleaning process.
- Handwashing instructions
Cleaning your Ninja blender by hand is another one option. Sure, it will take more time and work, but it is the most effective approach to clean your blender if you fail to do so promptly after use. Remove the blade assembly after removing the top and lifting the Ninja blender. Using flowing water, clean all the parts of the blender. Remove the soap off the components and air dry them on a drying rack.
Cleaning the Blender Jar is a simple process
The blender jar requires more effort to clean than the other components. You must first clean the jar since it may be contaminated with food remnants. Check out the Best Blender Bottle Uses before continuing.
Step 1: Using Dish Soap, combine all of the ingredients
Half-filled ninja blender jar with lukewarm water Add a couple of drops of dish soap after that. Ensure that the lid is securely fastened. Now, turn on the blender and put it to the lowest setting.
Blend for 1 minute, or until a frothy solution forms. Rinse the blender jar with lukewarm water after removing the soapy water. This process should be followed on a regular basis to help remove food remnants adhered on the jar.
Step 2: Using Lemon, Remove Difficult Stains
Lemon can be used to erase stubborn stains from the blender jar. Fill the blender jar halfway with lukewarm water and set aside. After that, add a few drops of dish soap and half a lemon, coarsely diced.
- Blend for 1 minute after turning on the blender. After that, pour the mixture into the container and rinse it with lukewarm water.
- Scrub and clean the jar in the third step.
- Remove the sticky stains with a rough sponge, toothbrush, or steel wool once you’ve completed the preceding procedures.
- Then, with the rubbing tool, scrub over the stains. Rub it away till it’s gone. Remember to rub the jar’s outside. Finally, give it a thorough rinse.
Get rid of stains
There is a way to clean the blender jar if it still contains stubborn stains. Dish soap, baking soda, and vinegar can all be used in this situation. Fill the jar halfway with one cup of white vinegar, a few drops of dish soap, and half a cup of baking soda for making the solution.
Then, until it reaches the edges and lids, thoroughly incorporate the mixture. Pour it down the sink after the waiting period has ended.
After that, thoroughly clean the blender jar. If any vinegar or baking soda smells remain, clean it with dish soap and water once more.
Ninja Blades and Other Small Components Cleaning
Occasionally, while cleaning the jar, the blades and minor pieces become dirty. The obstinate residues tended to stick to the blade’s edges the majority of the time. Ninja blades, the base gasket latch, and the cutting edge are among the minor components of the blenders.
Take the following steps:
Step 1: Take the blades out of the machine and clean them
By turning the base of the blender jar, you may get rid of the blades. Remove the blender jug’s sides and set aside. Dish soap and hot water can be used to clean the blades.
- To clean stuck-on bits, use a toothbrush or sponge. Alternatively, a toothbrush soaked in white vinegar can be used to scrub the blades. The edges will appear new and shinier after using white vinegar.
- Cleaning Pots and Pans for a Gas Stove can also be done with the vinegar solution.
- Keep your hands away from the blades so you don’t get cut.
- Check out our Cookware for Glass Top Stoves review for more information.
Step 2: Use Polident Tablets to clean any very dirty blades
- If your blades are excessively unclean, polident tablets are an excellent way to clean them. Polident is an antibacterial tooth-whitening pill. It removes even the toughest stains effectively and give better results.
- Pour one or two polident tablets into a bowl of water. Wait for a time after submerging the blades in water. Without removing the edges, you can clean the blades as well.
- Fill the jar halfway with lukewarm water, then drop in two polident tablets. Allow for an hour of soaking time. Remove any leftover stains by scrubbing the blades with a toothbrush.
Step 3:Cleaning and lubrication of the gasket
While cleaning the blades, ensure that the gasket latch is clean. Cleaning it can be done with a toothbrush or a sponge. Clean the gasket and lubricate it with vegetable or olive oil after it has been cleaned.
