Floor mats and liners made by WeatherTech are extremely easy to care for and maintain. You can easily clean it up with a garden hose by spraying it down, scrubbing it with mild soap, and rinsing it thoroughly. It’s also possible to clean it in the bathtub if you live in an apartment or simply don’t have access to a hose.
Remove the staleness by shaking it
- Shake the floor mats to get rid of any loose dirt and dust before applying the water or cleaning agent to them. This will prevent a sloppy situation from arising in the future.
- Using a soft object such as a wall to hit it against will ensure that you get as much of it as you can out of it.
Apply the water pressure to it
Examine the area to ensure that all of the debris has been removed and that there is no mud or anything else that cannot be removed with the force of the hose. Using a regular outdoor water hose, quickly spray down the Weathertech floor mats to remove any remaining dirt and debris from them.
Pressure washers should be used
Pressure washers can be extremely effective for removing more difficult stains if you have one. Lowe’s is the source for this particular one.It will blast away any dirt that is preventing your floor mats from being as clean as they should be, leaving them sparkling. Consider removing your car’s floor mats and giving them a thorough cleaning while you’re already pressure washing it.
Floor mat cleaner should be used
It is extremely difficult to find a floor mat cleaner that meets your needs. Especially for rubber or vinyl floor mat, Chemical Guys makes an amazing product.Dirt, mud, and stains are all removed by using this product. It contains a protective agent that helps to keep your floor mats in good condition for future use and maintenance.
Using a clean towel, wipe it onto the mat after brushing it
- A floor mat cleaner is available from the Weathertech company itself as well. After scuff marks and dirt have been removed, this two-part system is applied. Using a bristle brush, gently scrub the cleaner into your Weathertech floor mats. Cleaning with safe water and allowing for complete drying time before using again is recommended.
- Then mist the mat with water after it’s dried. Spread the solution evenly across all of the surfaces, using a damp sponge to ensure that the protectant is evenly distributed.
Remove any debris that has gathered as a result of the storm
As previously stated, using a brush can help to loosen grime and remove dirt from the surface of the water. Due to the wide range of quality among brushes, it’s a good idea to purchase one specific brush that you know will be used consistently.
For example, low-cost brushes will have weak bristles and will be “lazy” when it comes to doing their jobs properly. Make sure you purchase a brush that is capable of withstanding a significant amount of scrubbing thus that you may use that when you should really get that dried muck out of the crevices in your vehicle.When used with water and your preferred cleaner, it can be used to loosen up dried dirt.
Allow them to soak for a while
- Your floor mat may require professional cleaning if it is in particularly bad condition. Even though there aren’t many products on the market that advertise themselves as a good “floor mat soaking solution,” it’s sometimes necessary to soak the floor mat in a cleaning solution every now and then.
- It can help dissolve stubborn dirt and mud caked onto the vinyl by soaking it in a good cleaning solution for a while. The mat should be able to soak completely underwater without wasting any solution as a result of this procedure.
- Soak it in any solution that is safe for rubber and vinyl. For deep cleaning days, Griot Garage sells a cleaner that can be purchased in a large jug that can be kept on hand. When soaked for a short period of time, it is gentle enough to clean with without damaging the vinyl or rubber.
Protect your surfaces with a glossy sealant
Rather than a conditioner, Advance Auto Parts sells one that is more of a “polish.” Meguiar’s Natural Shine Protectant is a great choice if you want to give your floor mat a little shine.
Repair and restore the appearance of WeatherTech mats
It appears that no matter how hard you scrub or rinse your WeatherTech mats, you are unable to completely remove all of the dirt stains? How to clean WeatherTech Mats is simple when you follow this guide:
To begin, spray them off with water
- Each hole in your floor mats should have a retention hook removed. Shake your floor mats after removing them from your vehicle to remove any loose dirt. Dirt can be removed with a water hose.
- Using your bathtub to wash your floor mats instead of a water hose is an option if you do not have access to one.
Clean it with a stiff brush
Scrub all of the sides of the mat with a soft cleaning brush until it is completely cleaned. Continue to scrub the ridges to remove any dirt that has become stuck between them. Do this until all traces of dirt and marks have been removed.
Rinse thoroughly and allow to dry completely
Fill your tub with clean water and use it to rinse the floor mat, making sure to remove all traces of soap from the mat. Before reinstalling your floor mats in your car, make sure they are completely dry with a towel or let them air dry. Reattach the retention hooks to ensure that the floor mats do not slip once more.
