Water splashing in kitchen sink happens when water is draining much slower than the normal rate. Plumbers generally recommend that you use metal screens to stop water splashing. These screens allow your water to drain smoothly while they block foreign objects. However, as you know, it is often difficult to find metal screens in many retail stores.
Did you know that leaks and splashes can waste up to 50% of the water in your home? If you are experiencing water unexpectedly or unpredictably it could be due to overflow, splashing or leaks. In this guide, we’ll go through the common signs and causes of water splash back and how you can stop flushing those precious liters down the drain.
Table of Contents
Install a cover on the sink
Installing a cover on your kitchen sink is one of the easiest ways to prevent splashing, especially when the sinks in use. All you have to do is find a cover with a suitable size and shape that fits onto the sink’s basin.
While there are several different kinds of covers available, we recommend choosing one made of high-quality silicone or stainless steel. This will ensure it lasts longer and prevents any rusting or deterioration over time.You can also purchase covers that double as cutting boards and add a splash of colour to your kitchen’s décor.If you’re looking for an easy and cheap way to prevent splashing in your kitchen sink, installing a cover on the basin is a great option.
Use a splash guard
The water you put in the sink can splash back up out of the sink and onto your clothes, countertops, and floor. A splash guard is a simple piece of plastic that acts as a barrier to prevent this from happening.
Use a simple wall-mounted splash guard. This is a piece of plastic that fits between the front of your sink and the wall behind it. There will be holes on either side so it stays in place without you having to hold it.
Use a special splash guard with suction cups. You can also buy splash guards that are designed to sit on the edge of your sink using suction cups. These are often shaped like animals or other fun shapes, making them great for use in children’s bathrooms and kitchens.
Do not run water at high speed
There are a few things that you can do to prevent water splashing in your kitchen sink.One of the most basic and obvious ways to stop water from splashing up out of the kitchen sink is by reducing the speed at which water runs down the drain. Splashing is caused when water droplets rebound off a surface, so the less energy they have, the less likely they are to splash.
However, you should be aware that running water slowly can cause sink blockages if there are small objects in the drain. So always run the water for a few seconds before using it to make sure everything has been removed from the drain.You can also reduce splashing by adding more liquid to the water. This reduces the number of droplets and helps them to stick together more, reducing their bounce factor. Adding washing-up liquid or detergent just before you use it can have this effect. It will also get your dishes cleaner than usual. You can also buy special anti-splash devices for your sink drainage system which will help to prevent splashes as well as keeping smells in check.
Clean the sink
If you have a garbage disposal, put clean water and dish soap in the sink, turn on the disposal, then turn it off. While the disposal is running, sprinkle a little baking soda in it (you may want to do this over a trash can so you don’t make a mess). Follow that with some white vinegar, which will bubble up and loosen any grime stuck in the disposal. Turn the disposal on again for a few seconds, then turn it off and pour about 1/4 cup baking soda and 1/2 cup white vinegar down the drain. Let it sit for 10–15 minutes before washing out with hot water.
Use a stopper plug or basket strainer whenever possible
A plug or basket strainer fits snugly into your sink to help contain debris that would otherwise go down the drain. The plug has moving parts that seal against your sink when not in use, while the basket strainer just sits in your sink. If nothing else, this will keep things like utensils from falling down the drain while they’re drying.
This style of strainer works well for sinks that don’t have garbage disposals since food particles won’t be ground up and can be removed from the basket when you need to.
Conclusion
You can save from water splashing in kitchen sink by following these steps. As demonstrated above, there are several simple solutions for stopping water from splashing in your kitchen sink. In order to prevent water from splashing during use, you will first want to remove any items or particles that may be blocking your drain or causing excess buildup of gunk and grime. This is a particularly good idea if your sink is prone to residue build up due to hard water.
After cleaning out the sink and your drain well, you might also benefit from putting a little baking soda into your sink while it runs, especially if you have well water. Otherwise, install a splash guard on your sink and make sure that it is securely fastened so that it doesn’t get dislodged by the force of the water. Given these tips you should be able to avoid splashing and prevent dirty water from getting all over the place.
