After a hard day at work or at play, sitting in your hot tub is a great way to unwind and unwind some more. The buildup of slime, unclean water, and sludge in even the most exquisite tubs can make them appear unkempt. Maintaining your hot tub may turn out to be less of a bother than you anticipated if you keep on top of your hot tub maintenance. Your neighbors will want to take a swim in your hot tub after it has been well cleaned.
How to clean hot tub perfectly
Consequences for Safety
- However, even though cleaning a hot tub is an easy operation, there are a few things to keep in mind before taking on the task.
- Prior to using your hot tub, make sure you have read and followed the manufacturer’cleaning instructions.
- Make sure you only use cleaning solutions and chemicals that have been specifically formulated for hot tub cleaning needs.
- When handling and utilizing cleaning chemicals, make sure you wear safety goggles and gloves.
Tools
- Wipe the surface of the surface with a soft cleaning cloth or sponge
- Hose for the garden
Materials
- Line flush cleanser with a unique formulation
- Hot tub cleaners that are specifically designed
- Test strips for drinking water
- Spa sanitizing chemicals
- Clear the Lines of Confusion
Before emptying the tub, it is necessary to clean out any dirt, bacteria, and debris that has accumulated in the pipelines. “Line flush” cleaning products are specifically intended to accomplish this purpose. Line flushes should only be used if they are recommended by the bathtub manufacturer. All accumulated accumulation in the pipes and hoses is released into the hot tub when the necessary period has expired.
- Immediately turn off electricity and shut off the water supply
Using a circuit breaker, shut down the power to your hot tub. This step assists in preventing the pump or jets from turning on while you are attempting to drain the water from the tank or sink. Ensure that the electricity is turned off until the tub has been refilled.
- Cleaning the surface, jets, and accessories are all important steps
Clean the tub’s surface with a moist cloth to get rid of any silt, filth, or debris. To remove stubborn stains, use a soft cloth or a tub scrubber and a surface cleaner that has been recommended by the manufacturer. Unless otherwise specified by the manufacturer, do not use any home cleaning agents on the tub’s shell or pipework since they may damage the tub’s finish.
- Ensure that the filters are in proper working order
Using a garden hose, blast any filters out of the way and set them aside for later. When cleaning the filters, avoid using a brush because this will cause harm to them. Hot tub chlorine can be used to disinfect the tub and remove any buildup if necessary. After you’ve disinfected them, rinse them well with water.
- Fill the tub back up with water
First, connect the hose to a filter really well turn on water to get things started. Check to see that the water is passing through the filters properly. Start the hot tub only when the water reaches the bottom of the headrest cushion or is flowing over the jets. Allow for a few hours of running time in the bathtub.
- Water should be treated
Your hot tub’s pH and chlorine concentrations should be checked regularly. If necessary, use a hot tub shock, sanitizer, or clarifier to disinfect and purify the water. Following the appropriate limits indicated in your manual is always recommended. Cover the hot tub once the chemicals have been balanced in the freshly cleaned tub.
Discharging the Water from Your Hot Tub
- Before draining your tub, you should consider flushing the lines in the tub
In the inner workings of hot tubs, mold, bacteria, and other creatures can thrive and live because the water is heated to a temperature that they can tolerate. It is possible to contaminate the new water if all of the water is replaced without first cleansing all of the lines. You can keep your tub as clean as possible by running a specific cleaner through its lines on a regular basis, a practice known as “flushing the lines,” to eject and wash bacteria and filth from the tub’s interior.
For your hot tube, a line flush should be available from your local pool supply business, but it may also be purchased from your local hardware store. Because there are many various types of line flushes available, make sure you clarify that you require one for a hot tub.The technique for applying line flush varies depending on which product you choose. Most of the time, you’ll add the flush to your hot tube while it’s still running for the duration of the time specified in the flush treatment’s directions.
- Ensure if the hot tub also isn’t creating any electrical currents
It’s possible that if you don’t remember to turn off the power to your hot tub, the pump will go on when there isn’t enough water in it, causing damage to the motor and filter mechanism. Going to the fuse box and flipping the breaker for the circuit that is giving electricity to your tub to the “OFF” position may be necessary to guarantee that your tub is totally turned off.
Turning off the circuit breaker and turning off your tub will help prevent people from unintentionally turning it on if you need to take a break while cleaning or need to leave to pick up additional materials.
- Drain the bathtub of almost all the water it contains
Depending on whether or not flushing your lines resulted in a hazy discharge into the water, you may need to totally drain your hot tub. It is necessary to rinse your tub after this procedure to remove any leftover line particles. Then, if necessary, you can fill the tub’s footwell with water.