Apple’s iPhone is always with us, whether we’re at work or at dinner or in bed or in the toilet. It was only fair to assume them to become a bit soiled every now and again. The bulk of an iPhone’s surface may be cleaned with a microfiber cloth, which is a upfront procedure. It’s a whole different scenario with the speakers and microphones. Adding insult to injury, in contrast to a thumbprint display, if the iPhone’s speakers or microphones become too filthy, they will cease to function properly. The presence of a thick layer of dust, muck, or even cosmetics may quickly obstruct sound entering or exiting the grille, resulting in a quieter sound from your music and others being unable to hear you when you are talking on the phone.
To Remove Debris, You’ll Need a Tool
- Using a toothpick, wipe any dirt or grime from surface of the object.
- Make a small indentation in the microphone hole with the tip of the toothpick, twist it all around, and draw it back out again. In order to keep your iPhone from becoming damaged, follow these steps.
- Do not insert the toothpick into the microphone any farther than absolutely necessary. Perhaps starting at an angle will be beneficial. The tip should be inserted such that it is just above that inner rim of a hole but not any farther.
- If you jam the microphone in the middle, it has the potential to rupture the speaker capsule. In the event that you have gone too far, you will experience a popping sensation.
Move gently and with little, soft motions.
- When it comes to a more delicate manner, try using a toothbrush with super-soft bristles.
Use a cleaned toothbrush with super-soft bristle instead of inserting a wooden stick inside your phone if the thought of doing so scares you. To remove any obstructions from the microphone hole, gently brush it.
- If you will not have a spare toothbrush, a little paint brush will suffice.
A little craft brush, such as the kind that goes with such a children’s watercolor kit, is used as a lint remover if you need to have one lying about. Allow the tiny bristles to protrude into the hole in the microphone by brushing around it.
Maintaining Caution When Using Compressed Air
In the right hands, compressed air can be a very effective weapon in the fight against filthy iPhones. It’s critical to keep the equipment clean, which is where an air compressor and spraying dusters come in. These are particularly useful for cleaning hard-to-reach spots like MacBook fans or the region under a keyboard. It is possible that pressurized air will cause damage to both the iPhone’s speaker and the iPhone’s microphone. When it comes to pressurized air, Apple advises against its use.
Several helpful hints
Even if you have tried everything, including cleaning the iPhone’s microphone, if you are still experiencing problems and it appears that everything is working as it should or, if not, if you want to avoid the worst-case scenario, I strongly advise you to put some other small tricks into practice that can assist you in restoring the correct functionality of your device in the event of a brief “grab” or reception-related problem.
Exit the room with your iPhone’s headphones and any other headphones that may have been attached. Avoid covering the iPhone’s microphones with your fingers or even the case when holding your device or shooting a video on it. iPhone microphones should be free of any screen protectors, films, or covers. Change your location to a location where “there is much more field”, especially if the difficulties are only occurring during phone conversations.
Cleaning putty for electrical devices should be used
Cleaning putty for electronics may be purchased at the local electronics store and online. For a few seconds, push the putty into the hole in your microphone before removing it out of there. For best results, repeat this method three times to ensure each microphone speaker is just as clean as possible. Only 340ml of hot water, 142ml of ordinary glue, and 32g of salt are required for this project.
Mix the borate with 227ml of boiling water in a paper cup, then discards the cup. In a second cup, whisk together the glue as well as the final mL of water until thoroughly combined. Then combine the two mixtures together, stirring constantly, until the whole thing is firm. For approximately 5 minutes, knead the resulting ingredients till it forms a sticky ball.
Painter’s tape could be used to shield surfaces from damage
When it comes to cleaning the iPhone speakers, a wet toothbrush is an excellent instrument. However, it will not be able to remove certain little obstinate particles from the speakers. Tape such as masking tape or painter’s tape works perfectly for this use. It has been carefully engineered to leave no adhesive residue on whatever surfaces it comes into direct contact with. It features a pressure-sensitive adhesive, which makes it an excellent tool for cleaning the speakers of iPhone devices.
Tear a little section of the tape using your fingers. Make sure the adhesive part is on the outside of the roll, and then push it against the iPhone speakers. If there is dust stuck on the tap after each application, clean it out immediately! Discard it and build a new tap roller, and then repeat the cleaning procedure with the new roller.
Instructions for safely cleaning the iPhone 7’s microphone
- Brushes should always be gentle.
- When using the toothpick, exercise caution. A mic can be damaged if it is only used infrequently.
- Remember to switch off your iPhone after you are finished.
- Never use your phone with the screen protector or the phone cover still attached to it! The microphone will be more easily accessible if you remove them.