If you own a home, then the chances are that you might have an exhaust fan in your kitchen. This is true for the single-family homes and even condos that are attached to restaurants or other public houses. For this, if you want to install a new exhaust fan into your kitchen window, then it is important that you follow some kind of plan and understand what exactly needs to be done.
There are many different types of exhaust fans in the market and you can view the designs on their website. These fans are really good for increasing air circulation and improving your kitchen air quality. The entire kitchen will be cooled down and you will be able to cook with ease without a lot of heat. They work very efficiently in lowering the temperature of your kitchen and are also easy to install. Installing exhaust fan in kitchen can be a bit stressful task. It does not have to be that way though.
Table of Contents
The first step is to measure the window panes width and height
- Measure the window panes width and height. For a rectangular window, use a tape measure to determine the size of each side, and then double check your measurements for accuracy. If your window is square or circular, use a ruler to determine the distance between opposite corners or from the center of the circle to its outer edge.
- Once you have the correct measurements, head to your local hardware store and purchase an exhaust fan that will fit into your window. If you need help choosing the right size, ask a sales associate for advice. Fans come in a variety of sizes, so selecting the right one will depend on how big your window is.
Next measure the exhaust fan’s width and height
- Measure the exhaust fan’s width and height. The measurements will ensure you choose a window that has enough space for the exhaust fan.
- Select a window that is at least two feet from any cooking appliances to ensure proper ventilation. The vent of the exhaust fan should be located outside of your kitchen, not in an interior wall or ceiling, and it should be at least three to four feet from the corner of your house.
- Remove the screen if you have a screened window, or remove all glass panes if your window has glass panes
- Place a level on top of the window frame to check that it is level.
- Use wood shims to level out the frame if needed.
- Attach wood screws through each corner of the exhaust fan into the window frame or wall studs to secure it in place.
Prepare the exhaust fan by drilling holes into the fan cover, one near each corner
- Prepare the exhaust fan by drilling holes into the fan cover, one near each corner. Thread a wire through each hole and tie a knot in it to prevent it from slipping through the hole.
- Next, close the window with the fan held in place.
- Drill two holes on each side of the window frame, about half an inch away from its edge.
- Hold the fan in place and mark where to drill so that the screws will go into studs. Now you can secure the fan in place using screws.
The next step is to attach the louvers to the exhaust fan
- Attach the louvers to the exhaust fan. The louvers are usually made of plastic or metal, and they are usually located inside the window frame.
- To attach the louvers, simply screw them into place using a screwdriver or drill.Next, you will need to remove the old fan, if it was installed previously.
- If you are working with a double-hung window, then you will need to remove the bottom sash first.
- Also, make sure that there is no insulation around your windows before removing any trim pieces.Make sure that all of your wires are properly connected before you begin installation.
Once that is done, you will then screw in the exhaust fan mount onto the window frame
- Start by carefully measuring the window.
- Use a tape measure to find the width and height of the window. You will want to get an exhaust fan that has a similar width and height of your window.
- If the fan is too large, it will not fit into the opening properly.Next, you will want to make sure that there is adequate space for the exhaust fan to be installed.
- Decide on whether or not you are going to use wood blocks or screws to attach the exhaust fan mount onto the window frame.
- If you decide on using wood blocks, simply drill holes through them and insert small screws into each hole. Once that is done, you will then screw in the exhaust fan mount onto the window frame.
You can now attach everything
This is a very detailed guide to installing an exhaust fan in your kitchen window.First, you need to figure out where you want the fan. Then you need to locate the studs and the power source. You will then cut a hole in your wall and install the housing box. After that, connect the wires and mount the fan.Then you can move onto the outside of your home. Find where you want it, measure it, and cut out your hole.
Conclusion
Installing an exhaust fan in your kitchen provides several benefits such as reducing cooking smells, minimizing the spread of heat and air-borne particles. Unlike regular fans, an exhaust fan has a built-in ventilation system which helps to get rid of contaminant gases like grease and smoke.
With the right tools and expertise, you’ll be able to easily get an exhaust fan installed in your kitchen window. It’s not as complicated as you might think, and can be a great way to add value and convenience to your home.